GraffitiSKIN is an invisible peelable coating that is a new and exciting weapon to add to the arsenal for the war on graffiti.

GraffitiSKIN is a water-based peelable coating that when applied and simply peel off leaving the protected surface clean.

GraffittiSKIN protects all applicable street sign, bus shelters and train surfaces from scratches, chips, burns and general damage caused by graffiti.

GraffitiSKIN is suitable for the fixture surface including gel coated-fibreglass (smooth, or rough patterned), brick walls, rendered walls, painted surfaces, masonry walls and sealed surfaces.

GraffitiSKIN qualities including lasts more than 1 year, cannot fall off or brake on, will not leave any residue, dirt cannot get underneath skin and water does not effect protection.

Product Information:
Package: 4 litres, 15 litres and 20 litres
Coverage: 1 litre protects 7m² at 50μm
Drying time: 10 mins to 1 hour
Curing time: 24 hours to 72 hours
Maximum Use: 9 - 12 months

Preparation:

1. Ensure GraffitiSKIN is stirred / shaken thoroughly.
2. Ensure surface to be protected is relatively clean and dry.
3. Use a thick nap (20mm or 3/4”) acrylic fibre paint roller, that is clean and dry, or already soaked in GraffitiSKIN.

Application:

1. Use paint roller to apply GraffitiSKIN / Spray to apply GraffitiSKIN - PRO liberally to the surface being protected.
2. Create a neat finish at border of application by slightly tilting the roller towards the border. This technique will create a lip at the edge of the application and will avoid a feathered edge.
3. Spraying of the product will give a very clear finish.

Removal:

1. Start at one corner of membrane and gently peel-off taking care to keep the membrane in one sheet.
2. Water may be required to aid release.
3. Wash surface with warn soapy water.
4. Warning ensures surrounding surfaces are completely washed down and all GraffitiSKIN pieces are removed.